Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window repairs has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. However, if windows with double glazed window repairs panes are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers to help the new pane to fit properly into the window frame.

If you plan to try to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any shards fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The corners of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaks in upvc window Repair windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be applied. It is essential to remember that when it is about uPVC window repair near me repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with a breeze. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's easy to change a window hinge however it is easier if someone else helps you to hold the frame.

Verify that the upvc window repair hinges are open and closed in the correct direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which causes a gap to form where the sash meets the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock may be misaligned. This happens on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than fix them. If you encounter any issues with your upvc window repair window it is recommended to speak with a professional as soon as possible.