Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your upvc window repair near me window repairs is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window repairs watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close your window and do an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, the old caulking may have to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease It could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier when you have a person to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also decreases the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. First, the hinges due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, can also be misaligned, and again it may be feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.