cat flap double glazing flaps allow your pet leave and come whenever they want without having to let them in or out. They also help keep your cat from having to go to the bathroom inside the house.

Fitting a cat flap in the door panel made of upvc is much easier than in glass doors, however it does require some skills and the appropriate tools.

Take a measurement of the door

Fitting a cat flap in the door can be a challenge but as long as you choose the right type of cat flap make sure you take your time and follow the directions provided, it shouldn't be a problem. We will show you how to mark the shape and use the jigsaw to cut out the door area. Then, we'll finish the job by affixing the flap. This will ensure that the flap stays in place and shields the door from rain and wind damaging the door.

To determine the size of the cat flap you need, measure your pet's width. This will let you select a cat flap that is big enough to allow your pet to go into the house and leave without having to open the door every time.

If your kit comes with a drawing showing where to drill then you can put it on the door, and then draw a pencil around it. If your door has sill or moulding on the bottom edge ensure you have enough clearance from these because this will keep your cat safe and stop them from gaining access to your home.

Then put on your eye protection and a dust mask. Then using a jigsaw begin to cut along the line that you've drawn in, but don't push the blade too hard as this will make it cut faster than you want it to. If you have a set square then make use of it to verify whether you're cutting in the right way and to make sure the hole is a good rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great way to let your pet in and out without worrying about them being a nuisance to a visitor, or leaving unwanted gifts in the house. It also prevents drafts and helps to keep the temperature in your home steady. However, putting a cat flap in your door could be an overwhelming task for those who haven't done it before, which is why many people to seek out a professional carpenter or joiner to do the job instead. This is a viable option, however you can do it yourself if your tools are in order and the steps are adhered to.

This is much easier to do on wooden doors, but it is possible with uPVC. However you should be cautious not to damage the doors as this could make it impossible to claim your warranty. The first step is to measure the door, ensuring that it will fit the new cat flap installer flap. If you have a standard uPVC panel, this should be easy. However when your back door with cat flap fitted is composite or a different type of door, you may require more care.

The next step is to determine the height of your cat's stomach. This is the distance from the floor to the lower part of the cat flaps for french doors's stomach and you'll need locate a place in the door where this measurement is within the range that your pet can comfortably go through. Once you've figured out the measurements you'll have to mark the area using a spirit level and a pencil so that you are certain that the opening will fit your cat.

Once you've marked the area, it's time to cut out the hole. You will need the jigsaw, and it is important that you take your time in order to ensure that the cuts are clean and smooth instead of uneven and rough, since it could cause damage to your door. Wear safety glasses and a dust mask when working with a jigsaw. Inhaling sawdust can be harmful for your health. After you have finished cutting the hole, you will require sandpaper to smooth the edges so that the cat flap is easily fitted into place.

Cut a Hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit is quite difficult. If you are not very experienced in DIY, it is recommended to hire an expert to do the work for you. A mistake in the process may not only be unsightly but it could also be an issue for security as well as allowing cold air to get in when the cat is outside and hot air to escape when inside.

The first thing to do is mark the location of the hole in the door using a pencil and a spirit level. This will ensure that it is correctly located and is in a straight line with the other components of the door. Make sure you have some sandpaper on hand to smooth out any rough edges.

Wear any safety gear you'll need to use the power tool. If you are concerned about the sound of the jigsaw, you can purchase a cordless version which is quieter and more user-friendly to use.

It is essential to only remove the material that is required to make the cat flap. It is important to leave a bit of material to cover the wall of the flap. However cutting off too much material can cause issues or even damage to the frame of the door.

A upvc door may contain a metal frame or panel that will interfere with the microchip cat flap, and if this is the case you'll need to cut an oversize hole so that the metal doesn't come into contact with the wall of the cat flap, if this is done it is crucial to fill in the oversize gap and seal it with water.

If you're installing a cat flap into the frame of a double-glazed window with a frame made of metal, you'll need to talk to a professional who will supply you with a new glass pane that already has the hole for the cat flap inside. It will be much cheaper to get this done rather than to attempt to fix a cat flap into an existing pane of glass that was not designed specifically for this purpose.

Install the Flap

cat flap in upvc door panel flaps let your pet come and go whenever they want, allowing them the freedom to relax inside the house whenever they're feeling like it. If you have an uPVC front door, it may be hard to install a cat flap. This is especially true if you do not own a glass panel that can be cut. If you're willing to purchase and install a new half-glazed uPVC panel, then it's possible to install a cat flap to these doors. It's not as simple as just making a hole in the door though and there are some things you'll need first to make sure it's secure.

A composite, uPVC, or GRP door panel is typically made up of a thin plastic skin that is attached to an insulating polystyrene core. The material is quite fragile and care must be taken when cutting into it to avoid damaging. This kind door has a template you can use to cut the hole.

Once you have marked the position of the hole in your door, it's time to install the flap. You can choose from a variety of options, from simple push-button flaps to ones that are microchip-activated and only let your pet in. Whatever type of cat flap you pick it's essential that your cat is able to use the flap comfortably without getting stuck outside in the rain.

It's a good idea to choose a circular fitting a cat flap in a upvc door rather than one that is square, since circles are more securely cut into the door glass. This is because square holes can make glass more vulnerable to cracking when a drill is used on it. It's also a safer option as you're not putting yourself at risk by having to drill into toughened glass that might break and injure your pet or your family. This is particularly important if you have child or elderly person in your home who may be injured by shards glass.