How to Unstick a Suzuki Ignis Key

Suzuki's quirky and affordable city car gets a midlife refresh. It's not a hot hatch, however, it handles urban and rural tarmac well. And its tight turning circle makes driving in the city easy.

The new model comes packed with clever driver assistance and safety features that includes lane departure warning and a sleepiness alarm, which are both welcome additions to long drives.

Steering Lock

The steering lock is a security feature that stops your Ignis from being taken when it's in gear. It's an important safety measure, but it can be a pain when you need to go somewhere, but you're unable to unlock the wheel. There are some simple ways to solve the issue.

Make sure that the ignition switch is set to "on". If that's the case, try turning the key in the same direction you did before the wheel was locked. This could be difficult however it's usually enough to unlock the wheel.

If the wheel doesn't unlock after spraying canned air into the ignition cylinder, you may lubricate the cylinder. Wear eye protection to avoid getting cannisters of air in your face. You can also use liquid graphite to lubricate your cylindrical.

If none of these strategies work, then you'll need to replace the ignition lock assembly. Fortunately, this is an easy component to find at any auto parts store. Make sure to purchase the exact replacement key for suzuki sx4, and then compare it with your old one before you attempt to install it. Remove the cover on the ignition to see the assembly.

Worn

The steering lock could bind the ignition switch and cause the key to be stuck. This safety feature is designed to stop your Ignis from moving while the engine is running. If this happens, turning the steering wheel will release it.

In time the Ignis keys get worn out and become harder to turn. This might not be as common as a defective ignition switch, but it could happen. If this is the situation it is recommended to replace your ignition key.

You should also find out if there is something that is blocking your Ignis key from getting into the ignition cylinder. There can be debris or dirt which can become stuck inside the ignition cylinder, preventing it from turning.

You should also try using a bit of grease to see if it aids. You can purchase a variety of lubricants at your garage or local auto parts store.

Another alternative is to choose the silicon "glow in the dark" key cover. These covers absorb light and then release it when the conditions are murky or darker. They also shield your keys from wear and tear. They are offered for the majority of suzuki replacement key models and are available on the internet or at a local suzuki swift car keys dealership.

Bent

A key may become bent over time. The teeth of the key may not be able to engage with lock cylinders in the exact same way. This can stop the key from turning. If this happens, the key will need to be replaced. If you have a spare key, it is best to have it duplicated, and keep it in a secure place.

Another reason is that the ignition cylinder itself may wear out. If the lock pins in the cylinder get stuck or snagged together, this can prevent a key from going through or out of the cylinder. This can be fixed by replacing the cylinder, but it is best to replace the cylinder prior to the key is stuck in the ignition.

If your Ignis key is still stuck after trying the easiest fixes it could be time to try lubricating your cylinder. Graphite or liquid graphite can help the lock pins to move more freely, which will loosen your key. You can find this in a lot of auto parts stores. Be sure to place your Ignis in park prior to applying the grease. Do not attempt manipulating the Ignis with your hands to free it. This could lead you to more serious issues.

Broken

If you've tried everything to remove a key but it still won’t move, your last resort is to try a fluid. You can purchase this at your local auto parts store and apply it to the inside of the cylinder that controls the ignition with a cotton ball or a rag. Try again. Move the key forwards and backwards gently to spread the grease. If you are able to push it forward, do so but do not push too hard or you may break it off inside the cylinder.

The key's internal circuitry can also become unresponsive due to aging and usage. This isn't as common and typically means that you'll want to have the key duplicated in order to get a new one.

The case of your suzuki swift replacement key keyfob could also get damaged or worn. This is especially true when you're using an inexpensive replica key fob with a rubber or plastic shell. Depending on the situation, The Key Crew can sometimes migrate the internal circuitry of the old key fob to the shell of a new case, saving you from having to purchase a new key fob. We'll let you know what options are available for your particular situation when we call you to schedule the service.